find ip address and port for teamviewer wake on lan

There are many, many different options for sending Wake-On-LAN packets. Next, choose a tool for sending that magic packet. You may want to look up information about forwarding Wake-on-LAN packets or forwarding packets to the broadcast address with your router. Some routers may not allow you to forward ports to this IP, so you may need to trick your router into allowing you to do this another way. If your PC has the IP address 192.168.0.123, you’d enter 192.168.1.255 as the broadcast address.Īccess your router’s configuration page and locate the port-forwarding screen to configure this.

For example, if your PC has the IP address 192.168.1.123, you’d enter 192.168.1.255 as the broadcast address. To do this, you’ll need to forward the port to the “broadcast address,” which will broadcast the packet to all computers on a network. This is known as a “subnet directed broadcast.” The Wake-on-LAN packet must be forwarded to every device running behind your router, and a device will only wake up if the information in the WoL packet matches it. You’ll need to forward a UDP port to all IP addresses behind your router - you can’t just forward to a specific IP address. Many utilities use ports 7 or 9, but you can use any port you like for this.

Find ip address and port for teamviewer wake on lan